3Com OfficeConnect 3C892A User Manual page 47

Figure 25 Windows NT Protocols Configuration Window
3 Click Add.
The Select Network Protocol dialog box appears as shown in Figure 26.
Figure 26 Select Network Protocol Dialog Box
4 Select TCP/IP Protocol and then click OK.
The following message appears.
Figure 27 DHCP Message Box
5 Select the appropriate response for your network.
6 You are then prompted to insert your installation CD-ROM. Insert the Windows NT
4.0 CD ROM and then click Continue.
For users who have Remote Access Service (RAS) installed on their PC, after the
appropriate files are copied to your PC, a message box asks whether or not you
would like TCP/IP installed for RAS. If you select Yes, you must select the device
you want to access remotely and then click Close.
7 After the appropriate files are copied to your PC, you will see TCP/IP Protocol listed
in the Network Protocols group box, as shown in Figure 28.
TCP/IP Setup Using Windows NT 4.0
41