Page 1
Published July 1999 ETUP Congratulations on choosing the 3Com OfficeConnect ISDN LAN Modem! For the most common network application, creating a LAN with shared Internet access, the ISDN LAN Modem setup is a simple, two-step process: Install . . .
ISDN Service already installed at your location, with an available ISDN RJ-11 outlet. If you have not yet ordered ISDN service, call (800) 343-3266 to have 3Com order your line for you free of charge. An Internet Service Provider (ISP) Account.
ISDN LAN M NSTALLING THE To install the ISDN LAN Modem: Turn off your computer. CAUTION: Do not connect more than one computer for this initial setup. After installation and configuration, you can connect additional computers and/or printers to the ISDN LAN Modem. Do not connect the ISDN LAN Modem to an existing LAN until after you have completed the configuration.
If you experience problems connecting to your ISP, refer to the troubleshooting section of the OfficeConnect ISDN LAN Modem User Guide, located on your CD-ROM. Click Continue. This takes you directly to the support page for the LAN Modem on 3Com’s World Wide Web site. ISDN LAN M ODEM...
For access to documentation, firmware upgrades, and all the latest information about your ISDN LAN Modem, go to http://www.remoteaccess.3com.com/support/docs/lanmodem/welcome.html. ONNECTING After you have finished configuring your ISDN LAN Modem, you can connect an additional Ethernet hub or hubs to the ISDN LAN Modem to add up to 25 users.
Page 6
TCP/IP D HECKING It is recommended that you return your TCP/IP settings to their factory default values (this is for use with dynamic IP addressing). To do this, follow the steps for your operating system: Windows 98 and 95 From the Start menu, select Settings, and then Control Panel.
Page 7
OTE FOR INDOWS If you are already using Dial-Up Networking for remote connections, you may have to make the following changes to your Internet connection parameters: From the Start menu, select Settings, and then Control Panel. Double-click the Internet icon. Click the Connection tab, and clear the check box labeled Connect to the Internet as needed.
Need help?
Do you have a question about the OfficeConnect 3C892 and is the answer not in the manual?
Questions and answers