Ascertain The Pin Code; Tools Menu - Husqvarna Automower 305 Technical Manual

2.3 Ascertain the PIN code

If you forget the PIN code for the robotic lawnmower
or when a mower is blocked because an incorrect
code has been entered, you can find out the right
code. In the input mode for PIN code, or when the
main menu is displayed: Hold down the 9 key for
five seconds, a combination of twelve letters and the
mower's serial number will then be displayed.
If the mower is locked for a while due to an
incorrectly entered PIN code, you have to wait
before making another attempt before the letter
combination can be read.
The letter combination can be different in different
attempts on the same mower with the same PIN
code.
Contact the national service organisation and state
the letter combination and serial number. They can
then identify the right PIN code.
For GARDENA R40Li and R70Li, customers must
also be able to provide the right PRK (Product
Registration Key) to obtain the PIN code. The PRK
can be found on the product registration sheet that
comes in the box with the lawnmower. The PRK
is unique to each mower and is linked with the
mower's serial number. The aim with the PRK is that
customers can demonstrate that they are the rightful
owner of the product.
Press Arrow back to exit the function.
SECURITY CODE:
ABCD EFGH IJKL
S/N:
English - 18
2. SPECIAL MENU FUNCTIONS
000000001
OK
3020-009

2.4 Tools menu

In addition to the main menu selections which are
described in the Operator's Manual, there is a
further one called Tools. The Tools menu includes
the possibility of testing a mower's components and
information about different operating data.
To display the Tools menu:
1. Go to the main menu.
2. Press and simultaneously hold down the 7 and
9 keys for two seconds.
The text Expert mode will be displayed for
one second. A fifth main menu selection then
becomes available, illustrated with an icon in
the form of a cogwheel.
IMPORTANT INFORMATION
Make sure to hide Tools before the
mower is returned to the customer.
To hide the Tools menu:
1. Go to the main menu.
2. Press and simultaneously hold down the 7 and
9 keys.
The text Standard mode will be displayed for
one second and then disappear. The main
menu will subsequently only contain the four
standard options.
The Tools menu will also disappear the next time the
main switch is turned off and on.
OK
3020-010