Husqvarna Automower 305 Technical Manual page 40

3.13.2 Example 2
For Automower 305, 308 and GARDENA R70Li, this installation is not approved with the factory settings.
®
The passage is too narrow for Guide width Medium which means that the mower will not be able to follow the
guide through the passage and thus not find its way back to the charging station from area 2.
By changing Guide width to Narrow the mower will be able to follow the guide through the passage. With
Guide width Narrow there is a risk of tracks forming, however, in this installation there is no other option.
The narrow passage also makes it highly unlikely that the mower will find its way out to area 2 sufficiently
frequently on its own. The Remote Start - Proportion should therefore be increased. As the total working area
is not larger than half the mower's maximum capacity, Work hours or Work days should be used in order to
avoid the grass looking trampled.
The risk of tracks forming means that it is not possible to give a higher grade than satisfactory installation for
this working area.
Settings 305, 308, R70Li
Guide width
Distance
Proportion
Work hours & Work days
Grade
For the GARDENA R40Li, the passage is too narrow for the robotic lawnmower to follow the guide wire through
it. Therefore, Area 2 must be converted into a secondary area which is mowed using the MAN operating mode
during the days Area 1 is not mowed (depending on Work hours and Work days selection).
Settings R40Li
Proportion
Work hours & Work days
Grade
Area 1
English - 38
3. INSTALLATION
Value
Medium (factory setting)
99 m (factory setting)
Rarely (factory setting)
Operating time 07:00 - 23:00
(factory setting)
7 days a week
Value
Rarely (factory setting)
Operating time 07:00 - 22:00 (factory setting)
4-5 days a week
Highly satisfactory
Area 2
3012-1011
Value
Narrow
30 m
Medium
Operating time 07:00 - 23:00
(factory setting)
4 days a week
Satisfactory
Area 1
Area 2
3012-1036