Quick Info (Limited Tools Menu); Retrieve The Pin Code - Husqvarna GARDENA SILENO city Workshop Manual

4.3.6 Tools - Calibrate
Tools - Calibrate menu shows:
The
Guide calibration : The guide wire is calibrated
•
automatically during the first start-up sequence. A
manual calibration may however be necessary, if for
example the charging station installation is changed.
Place the product in the charging station and start
the calibration.
Tilt sensor calibration : If the product does not
•
operates as expected in slopes it might help to
calibrate the tilt sensor. Place the product on a
horizontal surface and start the calibration.

4.4 Quick info (Limited Tools menu)

Quick info menu is a limited Tools menu .
The
When the start page or the main menu is displayed:
1. Push and hold down the Back button for 2 seconds
to access the Quick info menu.
4.4.1 Quick info - Info
Quick info - Info menu has the same sub-menus as
The
Tools , except for the sub-menu Motors . Refer to Tools
in
menu (Expert mode) on page 9 .
4.4.2 Quick info - History
Quick info - History menu has 2 sections: Messages
The
Search times .
and
History - Messages menu shows:
The
Fault messages : The 50 last fault messages
•
• Info messages : The 50 last information messages.
History - Search times menu show the same sub-
The
Tools - History, total - Search times . Refer
menus as in
Tools - History, total on page 10 .
to
4.4.3 Quick info - Advanced
Quick info - Advanced menu shows the Calibrate
The
menu. It has the same sub-menus as in
Calibrate . Refer to Tools - Calibrate on page 12 .

4.5 Retrieve the PIN code

If the PIN code for the product is forgotten, the right
code can be found. In the input mode for PIN code, hold
down the OK button for 3 seconds. A combination of 12
letters and the product's serial number will then be
displayed.
If the mower is locked for a while due to an incorrectly
entered PIN code, you have to wait before making
another attempt and the letter combination can be read.
The letter combination can be different at different
attempts on the same mower with the same PIN code.
Contact the sales company and state the letter
combination and serial number. They can then identify
the right PIN code. Push the Back button to exit the
function.
12 - Special menus
Tools -
1067 - 001 - 16.04.2019