Adjustment Of The Handle In Inactive Position; Adjustment Of The Handle In Active Position - BORCAD Medical AVE2 Instruction Manual

7.1.2 Adjustment of the handle in inactive position

To initiate lowering, push the trigger in the marked direction with one hand, then
lower the rail to the lowest position possible. The parking position is suitable for birth
mother to get easily on the bed, eventually for better access to the patient during
birth.

7.1.3 Adjustment of the handle in active position

In the active position, you only need to pull the handle to the highest position. The rail
locks in the active position automatically.
Always check functionality of the side rails before use.
Upon regular service check-up it is necessary to check and adjust side rails
Siderails are intended to be a reminder, not a patient restraining device.
The siderails should always be in a full upright position and latched when a patient is
unattended.
BORCAD Medical a.s.
739 45 Fryčovice 673, tel.: +420 558 640 631
Warning:
Caution
34
www.borcadmedical.com