Maximum Bed Surface Position - BORCAD Medical AVE2 Instruction Manual

7.6.3 Maximum bed surface position

The leg rests can be positioned horizontally along the sides of the foot section. Due
to this function, one laying surface can be achieved together with the seat and back
sections. For positioning, pull „Turning the leg rest sideways" control lever as on the
picture below and with the same hand position the leg rest to straight direction, alike
as the foot section.
Then pull the „Tilting of the leg rest"control lever as on the picture below and with the
same hand position the leg rest in the horizontal position.
BORCAD Medical a.s.
739 45 Fryčovice 673, tel.: +420 558 640 631
49
www.borcadmedical.com