BORCAD Medical AVE2 Instruction Manual page 4

Introduction
Please read carefully the whole instruction manual, which is designed to familiarize
you with the correct use and the parameters of your new birthing bed. Please
always follow the instructions contained in this manual and use the bed only in
accordance with these instructions.
Please keep these instructions near the bed throughout its operation. Every person
operating the birthing bed AVE2 must read and understand the contents of these
instructions.
Very important information is marked throughout the manual by the following
symbols:
BORCAD Medical a.s.
739 45 Fryčovice 673, tel.: +420 558 640 631
Pictogram
Int x/y
IP
Meaning
EU legislation compliant product
The upholstery meets the requirements
on resistance to ignition according to BS
7176 in the Medium hazard category.
The upholstery meets the requirements
of BS EN 1021-1, BS EN 1021-2, BS
5852 – resistance to ignition sources 5
Warning:
Dangerous electric voltage
Warning:
Caution
This symbol introduces any information
that may help you avoid operative
problems
Type B applied parts
Serial number
Type number explanation
Marking of intermittent operation, i.e. if
the product has been continuously
operated for time period "x", then it must
rest idle for time period "y". For example,
int 10 / 20 means that after 10 minutes of
continuous use /positioning the product
must be out of use/not positioned for 20
minutes
Design protection against water ingress,
4
www.borcadmedical.com