Ppb-097 Bracket For Oxygen Bottles - BORCAD Medical AVE2 Instruction Manual

8.19 PPB-097 Bracket for oxygen bottles

Maximum load 10 kg (22 lb)!
The holder cannot be used on the bed on the right side of the DIN rail with respect to the patient
sitting on the bed!
It can be used on the left side of the patient while sitting on the delivery bed. There is a risk of
collision when positioning with the leg rest!
When positioning the delivery bed downwards, there is a risk of collision between the empty
bracket and the oxygen bottle bracket with the foot / legs of the operating personnel. Risk of
deterioration of the bed or injury to the patient, staff or a third party!
Do not step on the plastic frame cover when handling the bed with an oxygen bottle holder!
Before actively using the oxygen bottle holder, always check the correct dimensions of the oxygen
cylinder, including the top of the bottle. Larger dimensions can collide with positioning bars!
When positioning the seat, the oxygen bottle holder also becomes mobile. Warning!
When using an oxygen cylinder, always check the patient's movements on the bed. There is a risk
that the patient will cling to the oxygen bottle, thinking he has caught the sides of the bed! Risk of
deterioration of the bed or injury to the patient, staff or a third party!
Never remove the holder and the oxygen bottle holder together
Installation procedure
Place the bracket on the right DIN rail in the direction of the green arrow. The bracket
is designed so that it cannot be mounted on the opposite bracket (left DIN rail). Then
insert the oxygen bottle vertically into the holder.
Contrary procedure
To remove the oxygen bottle holder, the procedure must be carried out in the reverse
order to placement on the delivery bed.
BORCAD Medical a.s.
739 45 Fryčovice 673, tel.: +420 558 640 631
Caution:
Warning
69
www.borcadmedical.com