Electric Setting Of Trendelenburg - BORCAD Medical AVE2 Instruction Manual

7.4 Electric setting of Trendelenburg

The controller is marked with orange on both sides of the back section.
If the bed stops during the positioning movement and the control box generates a
sound signal, the foot section has not been fixed properly.
During movement, the back support must be loaded (e.g. with the patient's weight).
For positioning of the back section, push the above-marked button and hold it until
the positioning comes to an end.
To reset the back section to its original position, use motoric positioning (activates via
hand control, side control panel or side rail panel).
BORCAD Medical a.s.
739 45 Fryčovice 673, tel.: +420 558 640 631
Warning:
Caution
38
www.borcadmedical.com