Lifting/Lowering - BORCAD Medical AVE2 Instruction Manual

Adjustment to any of these positions can be done by pressing the controller in the
direction of the marked arrow and turning the foot section towards/outwards the
operator. Once reached, the foot section will automatically lock in both positions.
Before folding, always make sure the foot section is in the lowest position and back
section is not in Trendelenburg position!
In case of putting aside the upholstery of the foot section from the bed, it must be
placed on its wide laying surface on flat surface such as ground or bed. In case of
lying the foot section on the edge side, the upholstery may be damaged due to
heavy weight of the part.
When unfolding the foot section, other person(s) must not interfere.

7.5.2 Lifting/lowering

The surface of the completely pulled out foot section may be lifted up to the level of
the seat. All listed positions of the foot section do not limit motoric setting of the
birthing bed. Before loading the foot section, its correct locking should be checked by
short moves to the sides.
BORCAD Medical a.s.
739 45 Fryčovice 673, tel.: +420 558 640 631
Warning:
Caution
41
www.borcadmedical.com