Accessories; Ppb-062 Cable Hand Controller - BORCAD Medical AVE2 Instruction Manual

8 Accessories

8.1 PPB-062 Cable hand controller

For safety reasons it is restricted to pass the hand controller cable under the birthing
bed to reach the other side!
The operator may use the hand controller buttons to set the height position of the
seat and back section inclination. The functions of the control buttons are shown in
the picture below . Motoric setting is done by pushing and holding the desired
function buttons.
Recommended position of the manual control unit: only on the left side of the seat
section, see picture.
BORCAD Medical a.s.
739 45 Fryčovice 673, tel.: +420 558 640 631
Warning:
Caution
Power supply indicator
Lowering / lifting of the back section
Lowering / lifting of the bed
Lowering / lifting of the seat section
59
www.borcadmedical.com