Auto Key Lock Setting; To Change The User Password; Remote Ptz Reset; Factory Reset - LG LCC-K1000 Owner's Manual

LCC-K1000_AABBLLG_ENG

Auto Key Lock Setting

The keys on the controller is locked when there is no
operation for selected duration on the [Auto Key
Lock] option. To release the Key Lock mode, you
need to enter the password.
NONE: Auto Key Lock function is disable.
After 1 min.: The keys on the controller is locked
when there is no operation for 1 minutes.
After 3 min.: The keys on the controller is locked
when there is no operation for 3 minutes.
Manual Focus Speed
Home Position
PTZ

Auto Key Lock

000
NONE
After 1 min.
PTZ
After 3 min.
000

To Change the User Password

The factory default of password is "000000".
However, for security, you should change the pass-
word setting.
1. Select [Change Password] option then press SEL.
The sub menu will appears

Change Password

Remote PTZ Reset

PTZ

Factory Reset

000
Current:
New:
PTZ
Confirm:
000
2. Enter current 6-digit password using the number
buttons then press SEL.
3. Enter new 6-digit password using the number but-
tons then press SEL. Enter the password again to
confirm, and press SEL. The password is stored.
Note: We recommend that you do not operate the
controller during saving the password.
8/9/05 2:55 PM Page 21
[vV:bB]
[vV]
[vV:bB]
[Num]

Remote PTZ Reset

You can reset the connected PTZ camera's parame-
ters to the factory default settings.
Change Password
Remote PTZ Reset
PTZ

Factory Reset

000
[ Reset PTZ Camera ]
Are you sure?
PTZ
000
Factory Reset
You can reset the controller's parameters to the fac-
tory default settings. You need to enter the password.
Change Password
Remote PTZ Reset
PTZ
Factory Reset
000
Password: ------
PTZ
000
[ Reset PTZ Camera ]
Are you sure?
PTZ
000

About LCC-K1000

Shows model name and the current firmware version
of the controller.

About LCC-K1000

PTZ
000
[ About LCC-K1000 ]
LG Electronics Inc.
PTZ
Firmware ver. 1.00
000
[vV:bB]
: OK
SEL
[vV:bB]
[Num]
: OK
SEL
[vV:bB]
: OK
SEL
21