Removing Platform Default User Account - LG MultiSITE VM3 Startup Manual

Hide thumbs Also See for MultiSITE VM3:
Table of Contents

Advertisement

Removing platform default user account

In this Commissioning Wizard step, you specify platform login credentials (user name and password) to replace the factory-default platform
user in this MultiSITE VM3 controller.
Note that the Commissioning Wizard in Niagara 4 prevents commissioning a MultiSITE VM3 controller that retains the factory default platform
user account. To proceed, you must enter a different user name, along with a "strong" password (this means a minimum of 10 characters
including: at least one uppercase character, at least one lowercase character, and at least one digit).
Following your entry in this dialog, another step (if pre-selected) lets you create additional platform admin users, if needed. Each platform
user must have a unique user name and use a "strong" password. Up to 20 total users are supported.
• Each platform user account has the same (full) platform admin access.
• Users can change their password, and even create additional platform admin accounts.
• User name and password entries are case sensitive.
If you are not changing the controller's IP address during commissioning, the credentials for your replacement platform user are "remem-
bered" in the current session. This can simplify platform reconnection to the controller after it reboots from commissioning. This is useful in a
"migration" scenario.
However, if changing the IP address in commissioning, you need to remember/re-enter the new credentials for a platform user in order to
reconnect.
Note:
Always make careful note of any changed platform credentials, and guard them closely, since they provide the highest security level access
to any Niagara 4 platform.
Figure 21: Initial dialog to replace the factory-default platform user account.
RUNNING THE COMMISSIONING WIZARD
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
31

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pbacnbtr1a

Table of Contents