Canon imageRUNNER ADVANCE C5000 Series Technical Workbook page 226

BK
19) Remove the 2 screws [1], 1 wire saddle [2], and 1 connector [3]. Detach the high voltage
PCB box [4] and temporarily place it on the controller box.
20) Remove the 4 wire saddles [1], 1 edge saddle [2], and 3 relay connectors [3] to detach
the harness.
21) Remove the 2 screws [1] and 1 projection [2] to detach the fan [3].
22) Remove the screw [1]. Remove the rail cover (front) [2] and the spring [3] while pressing the rail
cover(front) [2] to prevent the spring from dropping inside the machine.
8