Canon imageRUNNER ADVANCE C5000 Series Technical Workbook page 116

5) Attach 1 sheet to the tray cover (upper) and the tray cover (lower) respectively from the gap made after
removing the Grate-shaped Lower Guide. Refer to the chart below for the push-on standards [b].
6) Make sure that the paper surface sensor flag is detected by the sensor by lifting & lowering the Tray 1 &
the Tray 2. [A] indicates that the flag is not detected by the sensor while [B] indicates the flag is detected by
the sensor.
7) Reassemble the finisher in reverse order from Step 2).
4Y3-3015 SHEET
pg. 114