Push down on the Lock Shaft for
30 seconds with a blunt end object
like a 7 mm Allen Wrench.
Make sure that the clear plastic bag
is not punctured.
Do not use a sharp object as this may
puncture the plastic bag.
The sound of air leaking out of the
bottle may or may not be heard.
In the case that a small amount of toner
escapes from the bottle and soils the
inside of the bag and the toner bottle,
discard the plastic bag and wipe clean
the toner bottle before reinserting the
bottle in the cardboard box.
The toner bottles that have been depressurized at the factory are marked as follows:
1. On the bottle
Position: Left lower side of color label
New Products: White mark
With countermeasure: Black mark
e-Support Filename:
Black or White
Circular Marker
TP10 123b.pdf
06-19-13
Date:
Page 3 of 15