Canon imageRUNNER ADVANCE C5000 Series Technical Workbook page 132

back in the host machine.
[Caution] If the unit is pushed in while the ITB pressure release lever is not in horizontal position, pressure
will not be applied to the ITB unit even by turning the ITB pressure release lever. Therefore, if the host
machine operates in this state, the belt displacement error (E075) occurs.
9) Secure the ITB unit [1] with the 2 screws [2], and then turn the ITB pressure release lever [3] in the
direction of the arrow to apply pressure.
[Caution] If pressure is applied to the ITB unit without tightening the screws, the ITB may be damaged.
10) Put the fixing feed unit back in the host machine.
11) Fit the ITB inner middle cover [1] on the 2 hooks [3], and then secure the cover with the 1 screw [2].
12) Close the front cover, and then turn ON the main power switch.
pg. 130