Canon imageRUNNER ADVANCE C5000 Series Technical Workbook page 143

- Be sure to place the removed Process Unit [1] on paper [2] or the like, and cover it with the drum protection
sheet [3] or wrap it with paper [3] (five or more sheets) so as to shield the drum, otherwise failure may occur
in the output image.
6) Close the Process Unit Inner Cover [1].
7) Pull out the Fixing Feed Unit and the ITB Unit.
[Caution]
- Be careful not to touch the ITB with fingers or damage it, otherwise failure may occur in the output image.
- Be sure that the ITB Pressure Release Lever is in the horizontal position (released state) to put the ITB
Unit back in the machine. If the unit is pushed in while the ITB Pressure Release Lever is not in the
horizontal position, pressure cannot be applied to the ITB Unit even by turning the ITB Pressure Release
Lever. Operating the machine in this state causes Belt displacement error (E075).
pg. 141