Canon imageRUNNER ADVANCE C5000 Series Technical Workbook page 207

The following changes occur when upgrading the HDD of the imageRUNNER ADVANCE C5051/ C5045/
C5035/ C5030 copiers from v06.17 to v06.18:
No.
1 Additional Hard Disk Drives have been added.
The following changes occur when upgrading the COPY-AP of the imageRUNNER ADVANCE C5051/
C5045/ C5035/ C5030 copiers from v56.01 to v60.01:
The following changes occur when upgrading the Box-AP of the imageRUNNER ADVANCE C5051/
C5045/ C5035/ C5030 copiers from v55.04 to v60.01:
No.
The above firmware has been revised due to the upgrade to System Software
1
v60.39.01.
The following changes occur when upgrading the S-LNG of the imageRUNNER ADVANCE C5051/
C5045/ C5035/ C5030 copiers from v60.04 to v61.01:
No.
[Modification of field claim]
In keeping with the change to DCON v62.02, the default value of service mode has
been changed.
Service Mode (Lv2):
COPIER >ADJUST >EXP-LED >PR-EXP-Y, M, C, K
1
<Default value>
Before change: 11
After change:1
* The combination use of S-LNG v61.01 or later and DCON v62.02 or later is
required.
The following changes occur when upgrading the Stacker of the Staple Finisher-C1/ Booklet Finisher-C1
from v10.05 to v11.01:
No.
[Modification of a field claim]
Modification of a "1004" jam that occasionally occurs when the setting value of the
1
service mode item for punch adjustment [Service Mode (Lv1) >SORTER > ADJUST
>PNCH-HLE] is changed to any one of the values between "0" and "-4."
[Modification of a field claim]
Modification of a "021101" Jam (stationary jam at the inlet sensor) that occasionally
2
occurs when the paper size is changed from LTR (the Paper Deck) to LDR (copier
paper cassette) during a collate job with mixed size paper in use.
[Modification of a field claim]
3 Modification of a E503-0003 (communication error) that occasionally occurs during a
job with a finisher unit having a staple unit in use.
Description
Description
Description
Description
TP11 128e.pdf
e-Support Filename:
05-27-11
Date:
Page 8 of 12