Selecting The Vertical And Horizontal Copy Ratios Separately (Xy Zoom Copying) - Sharp MX-M232D Operation Manual

COPY FUNCTIONS
SELECTING THE VERTICAL AND HORIZONTAL COPY
RATIOS SEPARATELY
The XY ZOOM feature allows the horizontal and vertical copy ratios to be changed independently.
Example: Reduction only in the horizontal direction.
• This feature cannot be used with the 2 IN 1 or 4 IN 1 feature.
Note
• To use the XY ZOOM feature with the DUAL PAGE COPY feature, set the DUAL PAGE COPY feature first and
then the XY ZOOM feature.
• The XY ZOOM feature cannot be used in combination with the AUTO IMAGE function.
Ratios that can be selected will vary depending on the position of the original.
Original position
Document glass
SPF/RSPF
1
Place the original in the document
feeder tray or on the document glass.
2
Press the [SPECIAL FUNCTION] key
and select "SPECIAL MODES" with
the [ ] or [ ] key.
ON LINE
DATA
SPECIAL
FUNCTION
LINE
COPY EXPOSURE PAPER SE
DATA
SCAN COLOUR MODE RESOLUT
The special function
screen will appear.
3
Press the [OK] key.
GHI
BACK OK
PQRS
PY
AN
The special modes
screen will appear.
39
(XY ZOOM Copying)
Original
Selectable ratios
SPECIAL FUNCTION
ID CARD COPY
SPECIAL MODES
ORIG. SIZE ENTER
PAPER SIZE SET
SPECIAL MODES
MARGIN SHIFT
ERASE
DUAL PAGE COPY
[OK]:ADJUST
Copy
(p.51)
25% – 400%
50% – 200%
4
Select "XY ZOOM" with the [ ] or [ ]
key.
ED COPY
LEX SCAN
LEX SCAN
5
Press the [OK] key.
OK
The XY zoom screen will appear, ready for selection of
the X (horizontal) ratio.
6
Set the horizontal ratio with the [ ],
[ ], [ ], or [ ] keys.
SPECIAL MODES
PQ
DUAL PAGE COPY
2in1/4in1
XY ZOOM
ACC
[OK]:ADJUST
XY ZOOM
115%
100% X:
86% Y:
[ ]:
X Y
A preset ratio can be selected
with the [ ] or [ ] keys. The
ratio can be adjusted in
increments of 1% with the [
or [ ] keys.
ZOOM
100%
100%
]