Button Manager Settings - Sharp MX-M232D Operation Manual

BUTTON MANAGER SETTINGS

Once installed, Button Manager normally runs in the background in the Windows operating system. If you need to
change Button Manager settings, follow the steps below.
For details on Button Manager settings, see Button Manager Help.
"BUTTON MANAGER" (p.73)
1
Right-click the Button Manager icon
( ) on the task bar, and select
"Settings" from the pop-up menu.
If the Button Manager icon does not appear
Note
on the task bar, click the "Start" button, select
"All Programs" ("Programs" in Windows
2000), select "Sharp Button Manager AA",
and then click "Button Manager" to start
Button Manager.
2
Click the tab of the scan menu that
you want to set up.
3
Select the start-up application in the
"Application Selection" area.
When the "Show TWAIN setting screen when
Note
scanning" checkbox is selected, the scan
setting screen appears when scanning is
executed to let you adjust the scanning
conditions.
Button Manager scan menu (factory
default)
Display/Button
Manager menu
SC1:
SC2:
SC3:
SC4:
SC5:
SC6:
The start-up application must be installed
Note
before using.
The setting screen of
Button Manager will open.
Application that starts
Sharpdesk
Email
FAX
OCR
Microsoft Word
Filing
4
Set up the "Colour Mode", "Edge" and
other scan settings in the "Scan
Setup" area.
• If you placed a two-sided original in the RSPF,
select "Duplex-Book" or "Duplex-Tablet" as
appropriate for the position of the binding on
the original.
• The name of the tab can be changed. Click the
"Menu Name" button and enter a new name.
After entering a name, click the "Apply" button
or "OK" button. This also changes the scan
destination name that appears on the machine.
(Example: SC1: XXXXX)
• If you selected "Duplex-Book" or
Note
"Duplex-Tablet" from the "Scanning Side"
menu, select "Right edge is fed first" or
"Top edge is fed first" for the orientation of
the original.
• For original sizes for which two-sided
scanning is possible, see "SINGLE PASS
FEEDER/REVERSING SINGLE PASS
FEEDER" (p.107).
• Some settings cannot be selected in
some applications.
• When "Show TWAIN setting screen when
scanning" is selected, only "Menu name"
can be selected.
5
Click the "OK" button.
This completes the settings.
SCANNER FUNCTIONS
74
5