Power On The Machine; Installing The Software - Sharp MX-M232D Operation Manual

SETUP

POWER ON THE MACHINE

The power switch is located on the left side of the machine.

INSTALLING THE SOFTWARE

• The screen images in this manual are mainly for Windows Vista. With other versions of Windows, some screen
Note
images may be different from those in this manual.
• If an error message appears, follow the instructions on the screen to solve the problem. After the problem is
solved, the installation procedure will continue. Depending on the problem, you may have to click the "Cancel"
button to exit the installer. In this case, reinstall the software from the beginning after solving the problem.
1
The USB cable must not be connected
to the machine. Make sure that the
cable is not connected before
proceeding.
If the cable is connected, a Plug and Play window
will appear. If this happens, click the "Cancel"
button to close the window and disconnect the
cable.
The cable will be connected in step 12.
Note
2
Insert the CD-ROM into your CD-ROM
drive.
3
Click the "Start" button, click
"Computer", and then double-click the
CD-ROM icon (
• In Windows XP, click the "start" button, click
"My Computer", and then double-click the
CD-ROM icon.
• In Windows 2000, double-click "My Computer",
and then double-click the CD-ROM icon.
4
Double-click the "Setup" icon (
• In Windows 7, if a message screen appears
asking you for confirmation, click "Yes".
• In Windows Vista, if a message screen appears
asking you for confirmation, click "Allow".
7
Turn the power switch to the "ON" position.
).
)
.
5
The "SOFTWARE LICENSE" window
will appear. Make sure that you
understand the contents of the
software license, and then click the
"Yes" button.
You can show the "SOFTWARE LICENSE" in
Note
a different language by selecting the desired
language from the language menu. To install
the software in the selected language,
continue the installation with that language
selected.
6
Read the message in the "Welcome"
window and then click the "Next"
button.
7
To install the software using the most
general options, click the "Standard"
button of the "Connected to this
computer" menu and go to step 11.
To install particular packages, click the
"Custom" button and go to the next step.