Card Shot - Sharp MX-M232D Operation Manual

CARD SHOT

When copying a card, this function allows you to print the front and back sides of the card next to each other on a
single sheet of paper.
This function creates 2 in 1 images of the front and back side of the card and centres them on the paper.
• Paper cannot be fed from the bypass tray.
• The card shot function cannot be used in combination with margin shift, edge erase, dual page copy, 2 in 1 / 4 in 1
copy, and XY zoom copy.
• When card shot is used, the rotation copy function does not operate.
1
Place the original on the document
glass.
2
Press the [SPECIAL FUNCTION] key
and select "SPECIAL MODES" with
the [ ] or [ ] key.
ON LINE
DATA
SPECIAL
FUNCTION
LINE
COPY EXPOSURE PAPER SE
DATA
SCAN COLOUR MODE RESOLUT
The special function
screen will appear.
3
Press the [OK] key.
GHI
BACK
OK
PQRS
PY
AN
The special modes
screen will appear.
4
Select "CARD SHOT" with the [ ] or
[ ] key.
PQ
ED COPY
LEX SCAN
LEX SCAN
ACC
Original
CARD
CARD
Front of
card
Back of
card
Example:
Portrait
A4 size
SPECIAL FUNCTION
ID CARD COPY
SPECIAL MODES
ORIG. SIZE ENTER
PAPER SIZE SET
SPECIAL MODES
MARGIN SHIFT
ERASE
DUAL PAGE COPY
[OK]:ADJUST
SPECIAL MODES
2in1/4in1
XY ZOOM
CARD SHOT
[OK]:CHANGE
Copy
CARD
Example:
Landscape
A4 size
5
Press the [OK] key.
OK
The card shot screen
appears.
The default values for the length and width
Note
that initially appear when this screen is
displayed can be set "CARD SHOT
DEFAULT" (p.122)
6
Select "X" (width) with the [ ] or [ ]
key and enter the width with the [ ] or
[ ] key, and then do the same for the
length (Y).
Any number from 25 mm to 210 mm (1" to
Note
8-1/2") can be entered for the width, and any
number from 25 mm to 210 mm (1" to
8-1/2") can be entered for the length.
7
Press the [OK] key.
You will return to the base
OK
screen.
CARD SHOT
SIZE (mm)
X: 86
Y: 54
in the system settings.
CARD SHOT
SIZE (mm)
X: 100
Y: 100
56
3