Using The System Settings - Sharp MX-M232D Operation Manual

USING THE SYSTEM SETTINGS

1
Press the [SPECIAL FUNCTION] key.
ON LINE
DATA
SPECIAL
FUNCTION
LINE
COPY EXPOSURE PAPER SE
DATA
SCAN COLOUR MODE RESOLUT
The special function
screen will appear.
2
Select "SYSTEM SETTINGS" with the
[ ] or [ ] key.
PQ
ED COPY
LEX SCAN
LEX SCAN
ACC
3
Press the [OK] key.
GHI
BACK OK
PQRS
PY
AN
The administrator password entry screen appears.
4
Enter the administrator password with
the numeric keys.
ABC DEF INTERRU
GHI JKL MNO
PQRS TUV WXYZ
@.- _
ACC. #-C READ-END
• " " appears for each digit that you enter.
• The mode selection screen appears.
113
SPECIAL FUNCTION
ID CARD COPY
SPECIAL MODES
ORIG. SIZE ENTER
PAPER SIZE SET
SPECIAL FUNCTION
PAPER SIZE SET
DISPLAY CONTRAST
TOTAL COUNT
SYSTEM SETTINGS
Enter admin
password.
ADMIN PASSWORD:
-----
MODE SELECT
CHANGE ADMIN PW
COPIER
PRINTER
SCANNER
5
Select the desired mode with the [ ]
or [ ] key.
Example: The screen when "COPIER" is selected.
6
Press the [OK] key.
OK
The settings of the
selected mode appear.
Several programs will have checkboxes in front of
them. To enable a function (make a checkmark
appear), press the [OK] key. To disable the function,
press the [OK] once again to remove the checkmark.
To configure a program that has a checkbox, go to
step 9.
7
Select the desired program with the
[ ] or [ ] key.
8
Press the [OK] key and follow the
instructions in the program screen.
OK
9
To use another program for the same
mode, select the desired program with
the [ ] or [ ] key.
To use a program for a different mode, press the
[BACK] key and select the desired mode. To exit
the system settings, press the [CA] key.
MODE SELECT
CHANGE ADMIN PW
COPIER
PRINTER
SCANNER
COPIER
EXPOSURE ADJUST
MARGIN DEFAULT
ERASE ADJUST
ID CARD SETTING