Misfeed In The Lower Paper Tray - Sharp MX-M232D Operation Manual

MISFEED IN THE LOWER PAPER TRAY

• Make sure that there is no misfed paper in the tray before pulling it out.
Note
• Use the following procedure to remove misfeeds that occur in the 250-sheet paper feed unit/2 x 250-sheet paper
feed unit.
1
Open the lower side cover.
2
Remove the misfed paper.
3
If the misfed paper is not seen in step
2, lift and pull out the lower paper tray
and remove the misfed paper.
4
Close the lower side cover.
If the message does not clear, check again to
Note
make sure that no pieces of paper remain.
Grasp the handle to open
the lower side cover.
Be careful not to tear the
misfed paper during
removal.
Be careful not to tear the
misfed paper during
removal.
The message " Clear
paper path." will be
cleared and copying will
be possible.
(p.94)
5
Close the lower paper tray.
TROUBLESHOOTING
6
98