Changing The Paper Size Setting Of Atray - Sharp MX-M232D Operation Manual

Envelopes
Do not use the following envelopes, as misfeeds will occur.
• Envelopes with metal tabs, clasps, strings, holes, or windows.
• Envelopes with rough fibres, carbon paper, or glossy surfaces.
• Envelopes with two or more flaps.
• Envelopes with tape, film, or paper attached to the flap.
• Envelopes with a fold in the flap.
• Envelopes with glue on the flap to be moistened for sealing.
• Envelopes with labels or stamps.
• Envelopes that are slightly inflated with air.
• Envelopes with glue protruding from the seal area.
• Envelopes with part of the seal area peeled off.
CHANGING THE PAPER SIZE SETTING OF A TRAY
If the size of the loaded paper is different from the size shown in the display, follow the steps below to change the paper size setting of the tray.
The paper size setting cannot be changed during copying, printing, fax printing (when the fax option is installed), or interrupt copying, or when a
misfeed has occurred. However, if the machine is out of paper or out of toner, the paper size setting can be changed during copying, printing, and
fax printing.
See "PAPER" (p.23) for information on the specifications for the types and sizes of paper that can be loaded in the paper trays.
The paper size cannot be set for the bypass tray.
1
Press the [SPECIAL FUNCTION] key.
ON LINE
DATA
SPECIAL
FUNCTION
LINE
COPY EXPOSURE PAPER SE
DATA
SCAN COLOUR MODE RESOLUT
The special function
screen will appear.
The screen shown above is the copy mode screen.
2
Press the [ ] or [ ] key to select
"PAPER SIZE SET".
PQ
ED COPY
LEX SCAN
LEX SCAN
ACC
3
Press the [OK] key.
GHI
BACK
OK
PQRS
PY
AN
The paper size setting
screen will appear.
: Shows tray "1".
Note
: Shows tray "2".
For the paper trays and tray numbers, see
"PAPER" (p.23).
SPECIAL FUNCTION
ID CARD COPY
SPECIAL MODES
ORIG. SIZE ENTER
PAPER SIZE SET
SPECIAL FUNCTION
ID CARD COPY
SPECIAL MODES
ORIG. SIZE ENTER
PAPER SIZE SET
PAPER SIZE SET
A4 A3
A3 B4
A4
A4R
BEFORE USING THE MACHINE
4
Press the [ ] or [ ] key to select the
paper tray for which the paper size is
being changed.
5
Press the [ ] key.
The cursor moves to the
paper size selection
position on the right.
6
Press the [ ] or [ ] key to select the
paper size.
To change the size of another paper tray, press the
[ ] key and then repeat steps 4 to 6.
Example: Tray 2
PAPER SIZE SET
A4 A3
A3 B4
A4
A4R
PAPER SIZE SET
A4 A3
A3 B4
A4
A4R
Example: Selecting B4 size
PAPER SIZE SET
A4 A3
A3 B4
A4
A4R
26
2