E+E Elektronik EE741 Series User Manual page 22

Measuring mode
Status
Measurand 1
Measurand 2
Measurand 3
Measurand 4
Measurand 5
Measurand 6
Fig. 21 Display - menu guidance
Output 1
Configuration for output 1: analogue or switch output, measurand, scale and switch setup.
Output 2
Configuration for output 2: switch or pulse output, measurand, switch setup.
Pipe diameter
Set the pipe diameter, see 2.1.1 on page 7
Display
Set the measuring mode and the display orientation.
Process parameter
Set the operating pressure and the standard conditions (see chapter 3.2.1 on page 8).
Low-flow cut-off
Set the cut-off threshold for leak flow volume suppression (see chapter 3.2.1 on page 8).
Counter reading
Display or reset the consumption meter.
Min/Max
Display or delete the min/max memory.
Settings
• Language (English / German)
• Averaging of analogue output signal. Number of samples selectable between 1 and 50. The
sampling interval is 0.1 s.
e.g. < 10 .... response time t
50 .... response time t
22
Setup mode
Output 1
Output 2
Pipe diameter
DNxx
Display
Process param.
Low-flow cut-off
Counter reading
Min/Max
Settings
<2 s
90
5 s
90
User Manual EE741 Inline Flow Sensor for Compressed Air and Gases