Programming; Calling Up The Technician Level; Structure Of The Software - DURKOPP ADLER 869-M Premium Service Instructions Manual

Programming

19 Programming
This chapter deals exclusively with content on the Technician level. For a
description of how to create programs or how to make changes to the
sewing parameters, the programming on the Operator level is explained
in the  Operating Instructions 869-M PREMIUM.

19.1 Calling up the Technician level

A password is requested to make it possible to make changes on the
Technician level.
To access the Technician level:
1. Switch on the machine.
2. Press the P and S buttons at the same time.
 The display shows the input screen for the password:
Fig. 81: Password input screen
3. Use the numeric buttons to enter the password (25483).
 You are on the Technician level:

19.2 Structure of the software

After the Technician level opens, the display shows the menu items for the
protected area. The following table lists the menu items and gives a brief
explanation.
Submenu
Lock Techn.
ParameterCall
Default Program
Machine config.
User config.
Service
Counter
Reset
Data transfer
Service Instructions 869-M PREMIUM - 00.0 - 07/2018
Code
4.0 25
0
****
1.9
Description
Lock the Technician level
Parameter selection
(visible only when activated)
Program presettings
Machine configuration
User configuration
Service
Counter
Reset data
Data transfer
5 3.0
51
Reference
 p. 92
 p. 92
 p. 94
 p. 97
 p. 111
 p. 124
 p. 131
 p. 131
 p. 132
91