Programming; Calling Up The Technician Level; Structure Of The Software - DURKOPP ADLER 867-M PREMIUM Service Instruction

Programming

20 Programming
This chapter deals exclusively with content on the Technician level. For a
description of how to create programs or how to make changes to the sew-
ing parameters, the programming on the Operator level is explained in the
 Operating Instructions 867-M PREMIUM.

20.1 Calling up the Technician level

A password is requested to make it possible to make changes on the
Technician level.
To access the Technician level:
1. Switch on the machine.
2. Press the P and S buttons at the same time.
 The display shows the input screen for the password:
Fig. 89: Password input screen
3. Use the numeric buttons to enter the password (25483).
 You are on the Technician level:

20.2 Structure of the software

After the Technician level opens, the display shows the menu items for the
protected area. The following table lists the menu items and gives a brief
explanation.
Submenu
ParameterCall
Default Program
Machine config.
User config.
Service
Counter
Reset
Data Transfer
Service Instructions 867-M PREMIUM - 02.0 - 02/2017
Code
4.0
0
****
1.9
Description
Parameter selection
(visible only when activated)
Program presettings
Machine configuration
User configuration
Service
Counter
Reset data
Data transfer
25 5 3.0
51
Reference
 p. 102
 p. 103
 p. 106
 p. 118
 p. 126
 p. 133
 p. 133
 p. 134
101