Access Control - Compaq WL110 User Manual

Figure 7-1 Close the Wireless System
8. (Optional) Click the second interface to set the security parameters (return
to step 4).
9. Click
OK
the main AP Manager window.
Your Access Point will automatically reboot and start bridging operation again
allowing access only to those users that have been configured with exactly the
same network name as identified in the setup of your Access Point(s).
Repeat steps 1 through 9 for all other Access Points.

Access Control

Another method to restrict wireless access to the Access Points is to use the
access control table feature and/or the RADIUS Server Access Control feature.
If you decide to enable the access control table feature your Access Points will:
only bridge messages to/from authorized stations, that have been identified
in the access control table.
ignore all requests to forward data to/from non-listed 11Mbps Wireless
LAN stations.
Enabling access control is a more rigid security mechanism than "Closing the
Wireless Network", as it requires the LAN administrators to authorize each
individual Wireless LAN station.
to save the new configuration to the Access Point and to return to
Security 7-3