All Access Points identified as operating on channel A would use channel 1
(2412 MHz).
All Access Points identified as operating on channel B would use channel
11 (2462 MHz).
Figure 6-5 Dual Channel Configuration
This way you can apply a maximum channel separation for neighboring Access
Points that will easily satisfy the requirements recommended for optimal
operation.
Station 1 would use channel A to communicate with its Access Point without
bothering station 2 to defer its transmissions to the neighboring Access Point.
When either one of the stations would roam to another location, it will
automatically switch its radio to any other operating channel required to remain
connected to the network.
Multiple-Channel Configuration
You can alternate the frequency channels of your Access Points between three or
more sub-channels (depending on local radio regulations that apply in your
country).
Optimizing Performance
6-14