Remote Statistics Tab - Compaq WL110 User Manual

A high noise level indicates a source of radio interference in the radio path
between the Access Point and its link test partners.
Comparing the values for the Access Point and its link test partner will help
you to identify the location where the interference occurs, and investigate
whether any actions to eliminate or remedy the source interference resulted
in a better performance.
For more information about the Remote Link Test window please consult the
AP Manager on-line help documentation by clicking the
the function key on your keyboard.
F1

Remote Statistics Tab

The remote statistics option allows you to monitor a set of SNMP variables for
each of the Access Point interfaces (both Ethernet and wireless).
Figure 5-9 Remote Statistics information
Starting Remote Statistics
To display remote statistics for the Access Point, you must first connect to the
target Access Point as described in "Connecting to Access Points" on page 5-18.
1. To view the remote statistics, select the
window in the monitor mode (see Figure 5-9).
The performance for each of the interfaces of the selected Access Point can be
displayed. Selecting the interface of your choice from the
down menu.
Help
tab from the AP Manager
Remote
Select the interface
Monitoring your 11Mbps Wireless LAN Network
button or pressing
pull
5-23