Step 3 - Configuring And Uploading Files - Compaq WL110 User Manual

5. After approximately 5 seconds, use the small pointed object again to press
the
Reload
You will see the LEDs changing color in the range Amber, Red and Green
again.
6. When all LEDs turn Amber, release the
The Power LED turns to Amber. Other LEDs will be off, or may flicker
Green to indicate LAN activity on the associated interface.
7. Start the AP Manager program and proceed with "Step 3 - Configuring and
Uploading Files"

Step 3 - Configuring and Uploading Files

The complete configuration and upload procedure of the forced reload
procedure is pictured in Figure C-2.
Figure C-2 Configuration an upload in forced reload mode
Prompt:
Select binary file
(*.bin)
Import
configuration file
(*.cnf)?
N O
Prompt:
View and verify
the configuration
settings
To configure the Access Point in forced reload status and to upload the
configuration perform the following steps:
Forced Reload Procedure
C-4
button for approximately 30 seconds.
Select Access Point
with Forced Reload status
Select menu:
Access Point -
Upload Software
Y E S
Configuration file
configuration
Click Upload to
configuration to
the access point
Reload
Button: Edit
Button: Monitor
Prompt:
Select
Prompt:
Verify
settings
save the
button.
Error Message:
First Upload Software
File