Compaq WL110 User Manual page 76

4. Click the
frequency of your choice. The number of channels is subject to local
regulations.
5. In the Wireless Advanced Setup window, use the
select a sub-channel that allows for maximum channel separation from
neighboring Access Points (minimum channel separation: 25 MHz).
Table 6-1 lists a number of successful channel combinations that you can
use to configure 11Mbps Wireless LAN networks with multiple Access
Points.
For Dual Channel Configuration (page 6-13), alternate between chan-
nels A and B.
For Dual Channel Configuration (page 6-13), alternate between chan-
nels A, B and C
Note: The availability of the listed channels in Tabl e6-1 is subject to local
radio regulations that apply in your country. A complete list of
supported channels for your country can be found in the online
documentation of the Wireless Client Adapters.
Table 6-1 Recommended Sub-Channel Configurations
Channel A
2412 MHz (1)
2417 MHz (2)
2422 MHz (3)
For wireless networks where wireless cells only have a slight overlap, you may
also experiment with multiple channel configuration using a channel separation
of less than 25 MHz, for example using the channels as listed in Table 6-2.
Table 6-2 Optional Sub-Channel Configurations
Channel A
2412 MHz (1)
6. Click
OK
Wireless Interfaces
7. (Optional) Repeat steps 3-6 to verify and/or change the frequency for the
second network interface in this Access Point.
8. Click
OK
return to the main AP Manager window.
9. Next create a backup-file of the new configuration (see "Step 4 - Create a
Back-up of the Configuration" on page4-6).
10. Update the "Access Point Configuration Record" in appendix A "Start-up
Configuration" to reflect these changes.
Optimizing Performance
6-16
button. A pull-down box will appear. Select the
Advanced
Channel B
2437 MHz (6)
2442 MHz (7)
2447 MHz (8)
Channel B
2427 MHz (4)
to close the Wireless Advanced Setup window and return to the
tab.
again to save the new configuration to the Access Point and to
Channel C
2462 MHz (11)
2467 MHz (10)
Channel C Channel D
2442 MHz (7) 2457 MHz (10)
pull-down menu to
Channel