Compaq WL110 User Manual page 106

Figure 8-2 Select Ethernet Protocols to be Filtered
3. Place a check mark in the check box of each protocol that does not need to
be transmitted to the wireless medium.
To stop filtering a specific protocol, clear the check box.
4. (Optional) To add a non-listed protocol to the list, click the
enter the protocol manually.
5. When finished click
All of the protocols that you have selected, and/or all of the custom
protocols that you have added manually, will be listed in the
field.
6. You can now select one of the other Bridge parameter options, change other
parameters or click
AP Manager window.
Static MAC Address Filter
To filter out traffic exchanged between stations that is not required to be sent or
received via the wireless interface, you can set the
bottom section of the
most networking environments (see Figure 8-1 on page 8-5).
You can use the MAC filtering option for example to filter broadcast or
multicast messages exchanged between wired servers that can receive each
others messages also via the wired network.
Advanced Network Configurations
8-6
to return to the
OK
to save your changes and return to the main
OK
tab. The default value,
Bridge
tab as pictured in Figure 8-1.
Bridge
Static MAC address Filter
will be acceptable for
<None>
button to
Custom
Protocols to Filter
in the