Compaq WL110 User Manual page 31

3. Enter the Read Write password and click
If the Access Point is found and if you entered the right passwords, a
new window appears with parameter tabs to change the configuration
(see Figure 4-4).
If the Access Point is not found in the network and/or the configuration
is not read, or if the wrong password is entered, the message "Invalid
password" appears.
Click
OK
You are now ready to change the Access Point configuration settings.
Step 3 - Set Network Name and Save Configuration
When installing the 11Mbps Wireless LAN network, you are advised to modify
the default settings of the wireless network interfaces. Although the Access
Point will work fine with its factory-set values, changing the 11Mbps Wireless
LAN parameters to unique values will differentiate your network from possible
neighboring networks.
1. Select the tab
2. (For the WL510 Access Point only) Choose the slot of the Access Point (
Card Slot A
configure.
Note: The integrated Wireless Network Interface of the WL410 Access Point
is called Interface 'A' in this guide.
Figure 4-4 AP Manager Wireless Interfaces tab
to return to the main AP Manager window and try again.
Wireless Interfaces
or ) that contains the wireless client adapter that you wish to
B
(default password is "public").
OK
(see Figure 4-4).
Basic Network Configuration
PC
4-5