Ap Manager - Compaq WL110 User Manual

Select the drive letter of your CD-ROM player in the Browse window,
then select the file "Run_CD.exe", and click the
Click the
3. From the CD Browser main menu select your Language.
4. Click on
5. Follow the instructions on your screen. If not available yet, a special
Compaq group in the Windows Programs menu will be created. This group
will provide access to the Client Manager.
Note: Previously installed versions of the Client Manager program will
automatically be replaced.
During the installation, you will be prompted for a directory to install the
program files. The default directory for the Client Manager program is:
"C:\Program Files\Compaq Wireless LAN\Client Manager"
Throughout this manual, we make references to a variety of files. Unless
otherwise specified, you will find these files in this default directory.

AP Manager

The AP Manager can be installed on both wireless and wired stations. To install
the program, you will need to select a station that is configured with:
Network Interface Card (NIC) to connect this station to the network. The
NIC cards can be of any type, including:
— Wireless client adapter (for wireless stations)
— Ethernet card
TCP/IP protocol stack (see "Verifying the TCP/IP Protocol Settings" on
page 3-6).
Installing AP Manager
To install the AP Manager software, proceed as follows:
1. Insert the software CD-ROM that came with your product in the CD-ROM
drive of the computer that you have designated as the LAN administrator
station.
If you downloaded the software from the web, please refer to the
installation instructions found on the web.
2. When the CD Browser automatically starts you can proceed with the next
step. If not:
Click the
Click the
Select the drive letter of your CD-ROM player in the Browse window,
then select the file "Run_CD.exe", and click the
Click the
button in the Run window. The CD Browser will start-up.
OK
Install Client Manager
button on the Windows task bar, then select
Start
button in the Run window.
Browse
button in the Run window. The CD Browser will start-up.
OK
.
Setting Up your LAN Administrator Station
button.
Open
.
Run
button.
Open
3-5