Configuration Scenarios; Wired Lan Administrator Station - Compaq WL110 User Manual

b. From the list of component types, select
button.
c. Select a TCP/IP protocol from the list displayed.
d. When your network does not use IP addressing, enable the option
Specify an IP Address
e. Enter a user-defined value in the
153.69.254.xxx
1-253.
f. In the Subnet Mask field enter the value
g. Click the
displayed on your screen.
8. When prompted to restart your computer, select
Once your computer has restarted, you will be ready to configure the Access
Point via any of the configuration scenarios as described on "Configuration
Scenarios" on pag e3-7.

Configuration Scenarios

In the previous section you may have selected either a wired, or a wireless LAN
administrator station. This section will describe some of the characteristics and
features of each type and identify whether further modifications to the setup of
your computer or "desktop workplace" are required.

Wired LAN Administrator Station

Using a wired LAN administrator station allows you to configure Access Points
via:
A "desktop workplace" setup, connecting your computer to the Access
Point via a hub as pictured in Figure 3-1.
A regular wired ethernet connection as pictured in Figure 3-2.
In most network environments, the Microsoft TCP/IP protocol will
work just fine. Alternatively, select a TCP/IP protocol that matches
your network operating system.
This will disable the DHCP mechanism that would assign an IP
address to your LAN administrator station automatically in networks
that include a DHCP server.
, where xxx may be any numerical value in the range of
When configuring multiple LAN administrator stations, make sure to
assign different values to each station.
button to confirm and follow the instructions as
OK
.
IP Address
Setting Up your LAN Administrator Station
and click the
Protocol
field of the format
255.255.255.0
.
Yes
Add
3-7