Compaq WL110 User Manual page 129

Power Ethernet Wireless
Amber Off
Amber
Amber Flicker
Green
Off
Red -
- Amber
-
Wireless
interface interface
A B
A B
Off Off
Amber Amber
Off Off
Flicker Off
Green
Off Flicker
Green
- -
- -
Amber -
- Amber
Description/Action:
Forced reload state.
• Proceed with the forced reload procedure as
described in appendix C "Forced Reload
Procedure" of this user's guide.
Forced reload state.
The flickering LED indicate LAN activity on the
specific LAN interface. This activity is typically caused
by the LAN administrator station that is performing
the forced reload.
• Proceed with the forced reload procedure as
described in appendix C "Forced Reload
Procedure" of this user's guide.
General hardware failure
• Reboot the Access Point as described in this
Appendix.
• If the problem persists, contact Compaq technical
support.
Ethernet hardware failure
• Reboot the Access Point as described in this
Appendix.
• If the problem persists, contact Compaq technical
support.
11Mbps Wireless LAN hardware failure
• Reboot the Access Point as described in this
Appendix.
• If the problem persists, contact Compaq technical
support.
Troubleshooting B-3