Use a longer time interval (e.g. 15 seconds) when you run a remote link test
only for background information purposes, or in cases when you access the
initiator stations network via a low-speed connection (e.g. a dial-up modem
connection).
Adjusting SNMP Polling Interval
The data displayed in the
between 1 second and 5 minutes. Adjust the refresh rate by changing the SNMP
polling interval.
Use a short interval (1 second) when you want to monitor remote statistics
on-line, e.g. in case of troubleshooting and/or when you have full
bandwidth access to the Access Point via the local network.
Use a long interval (5 minutes) when you run remote statistics only for
background display purposes, in cases when you access the network of the
selected Access Point via a low-speed connection (for example a dial-up
modem connection).
Monitoring your 11Mbps Wireless LAN Network
5-26
tab refreshes at regular intervals that can vary
Remote