Signalling; Reset - Simons Voss Technologies RouterNode 2 Quick Manual

RouterNode 2, GatewayNode 2,
SmartBridge

8 Signalling

Signal
Green flashing (~1.5 Hz)
Green flashing (~0.3 Hz)
Red flashing (briefly)
Green flickering

9 Reset

EN
network. You should therefore check the network
configuration and performance of your radio network
at regular intervals.
CAUTION
Network failure in critical situations
With the System 3060 and WaveNet you can imple-
ment emergency functions such as amok protection.
These emergency functions are critical.
1. Test locking systems in which critical emergency
functions are implemented at least once a month.
2. If necessary, also comply with other standards and
regulations according to which your system is oper-
ated.
If problems should occur or you want to reset the
device to its initial state, you can reset the device with
the reset button.
Meaning
Configured and ready to use.
Not configured, but ready for oper-
ation
Restart
Data transfer
8. Signalling
39 / 164