RouterNode 2, GatewayNode 2,
SmartBridge
IMPORTANT
Adverse effect on reception due to interferences
This device communicates wirelessly. Wireless communication can be
affected or may fail due to metal surfaces or interference.
1. Do not fit the device to metal surfaces.
2. Keep the device away from sources of electrical or magnetic inter-
ference.
Unauthorised access
If the electrical contacts in the device are short-circuited by unauthor-
ised persons, undesired reactions may occur.
Mount the device in an environment that is protected from unau-
thorised access.
Malfunctions due to weather conditions
This device is not protected against splash water and other weather in-
fluences.
Mount the device in an environment that is protected from the
weather.
Wiring to
device
EN
You can install the cables both on (surface-mounted)
and under (flush-mounted) plaster.
If you install the cables under the plaster, then use
the opening integrated in the base plate.
If you lay the cables on the plaster, then you must
modify the housing.
Power supply disconnected.
ü
5. Installation
35 / 164
Need help?
Do you have a question about the RouterNode 2 and is the answer not in the manual?
Questions and answers