Installing The Sim - Teldat REGESTA 1 Installation And Configuration Manual

Teldat S.A.

2.2.1 Installing the SIM

The SIM tray is situated in the rear end of the device. The following figure shows where to find the external tray:
Procedure:
• Extract the tray. To extract it, press the yellow button located on the right of the slot with the help of a pointed ob-
ject, such as a ballpoint, as shown in the following figure:
Extracting the external SIM
Fig. 11:
• In order to insert the SIM card, first place it in the tray.
• If the tray already has a SIM card, you need to extract it by pushing it using the hole on the underside of the tray.
• Subsequently, you need to place the SIM on the tray so that its connectors can be seen; these are normally a gold
color. In addition, you must make sure that the tray notch coincides with the SIM notch.
• Then insert the tray in the slot using the guides so the SIM card remains on the tray.
REGESTA 1
2 Installation
11