At Commands - Teldat REGESTA 1 Installation And Configuration Manual

Teldat S.A.
GSM/GPRS STATUS
IMEI: 357251010290987
IMSI: 214072530000435
GSM FW rel.: 07.03.940
Current mode: GPRS
State: GSM/GPRS module connected
APN: movistar.es
IP Address: 88.28.155.131
Connection uptime: 24 secs
#MONI: Cell
#MONI: S
#MONI: N1
#MONI: N2
#MONI: N3
#MONI: N4
#MONI: N5
#MONI: N6
OK
To exit enter the ATO or the AT*ZEXIT command which will close the TCP session:
ato
OK
Caution
Executing the ATO or AT*ZEXIT command can force the device to restore a GPRS or DATA connec-
tion. This happens when a parameter has been modified in the commands phase and this process
needs to be executed to activate the new configuration.

4.4 AT Commands

The REGESTA 1 implements a series of AT commands, both standard and proprietor, which permit it to cover all the
functionalities for this.
The following AT commands descriptions don't have examples of all the modes in which a command can be ex-
ecuted. This is particularly interesting to bear in mind when dealing with the commands that admit a format which in-
cludes the "=" character. With this, you can highlight the commands that include this character so they can be ex-
ecuted as well using: "=?" for help and "?" to view the actual configured value.
Example 1. "=?" -> help:
AT*Z1=?
*Z1: Provider APN
OK
Example 2. "=" -> configuration:
AT*Z1="netmovile.com"
OK
Example 3. "?" -> query:
AT*Z1?
*Z1: "netmovile.com"
REGESTA 1
BSIC LAC CellId ARFCN
52 0B05 082C 15
52 0B05 0123 52
60 0B05 082F 523
52 0B05 082B 48
60 0B05 0000 517
60 0B05 0000 528
60 0B05 0000 512
Power C1 C2 TA RxQual
-56dbm 46 46 0 0
-62dbm 40 32
-64dbm 38 30
-70dbm 32 24
-73dbm 29 37
-79dbm 23 15
-81dbm 21 13
PLMN
MOVISTAR
4 Configuration
17