Teldat REGESTA 1 Installation And Configuration Manual page 23

Teldat S.A.
4.4.1.2 SIM PIN Configuration
Syntax
Description
Example
4.4.1.3 Call Control
Syntax
Description
Example
REGESTA 1
AT+CPIN=<pin>
Allows you to configure the PIN code to activate the carrier's SIM. This command
is different from the standard because, in this device, you only need to enter it
once (unlike in the standard, where you have to enter it every time you boot the
device).
The PIN corresponds to a 4 digit numerical value.
AT+CPIN=0439
OK
ATS0=<n_rings>
Permits you to configure the number of RINGS the device should receive in an in-
coming call before automatically hooking off. This parameter is used to respond to
incoming CSD calls.
<n_rings> can take values between 0 and 100. A 0 value disables automatic an-
swering.
This command has the same functionality as AT*ZS0.
ATS0=2
OK
4 Configuration
19