Teldat REGESTA 1 Installation And Configuration Manual page 31

Teldat S.A.
Syntax
Description
Example
Syntax
Description
REGESTA 1
*Z13: 0
*Z14: 80
*Z15: 2
*Z16: 20
*Z17: 0
*Z18: 2
*Z22: "255.255.255.255"
*Z24: 23
*Z32: "255.255.255.255"
*Z34: 3100
*Z42: "255.255.255.255"
*Z44: 3200
*ZS0: 3
*ZSNMPIP: "0.0.0.0"
*ZSNMPPORT: 162
*ZGROUP: "Regesta1"
*ZCLT: 8,11
*ZKEEPALIVE: "",20,3,"NONE"
*ZRESET: 0
*ZSLIP: "10.0.0.1","10.0.0.2",2200,"slip"
OK
AT*ZEXIT
This command is used to exit the "AT commands" mode in the device and pass to
the "DATA" mode when executed from a serial port (COM). When this is executed
from a remote configuration session (socket 2), the session is closed.
The function of this command is the same as the ATO command.
Caution
Executing this command can force the device to restore a GPRS or
DATA connection. This happens when a parameter has been modi-
fied in the commands phase and this process needs to be executed
to activate the new configuration.
AT*ZEXIT
OK
AT*ZSERIAL
Permits you to VIEW the information on the modem serial number.
4 Configuration
27