Teldat REGESTA 1 Installation And Configuration Manual page 32

4 Configuration
Example
Syntax
Description
Example
Syntax
Description
Example
Syntax
Description
Example
28
AT*ZSERIAL
S/N: 725/000100
OK
AT*ZOPEN=<n_socket>
Permits you to open the indicated socket in the <n_socket> parameters.
<n_socket> can take the following values:
• 1 socket1
• 2 socket2
• 3 socket3
• 4 socket4
• 5 socket5
This command is only operative for sockets 1, 3 and 4. The rest are maintained for
compatibility. The main function is to activate the "spy" sockets.
AT*ZOPEN= 2
OK
AT*ZCLOSE=<n_socket>
Permits you to finalize the socket indicated in the <n_socket> parameter.
<n_socket> can take the following values:
• 1 socket1
• 2 socket2
• 3 socket3
• 4 socket4
• 5 socket5
This command is only operative for sockets 1, 3 and 4. The rest are maintained for
compatibility. The main function is to activate the "spy" sockets.
AT*ZCLOSE= 2
OK
AT*ZS0=<n_rings>
Allows you to configure the number of RINGs that the device should receive, in an
incoming call, before the call automatically hooks off. This parameter is used to at-
tend incoming CSD calls.
<n_rings> can take values between 1 and 100.
A 0 value disables the automatic answering machine.
This command has the same function as ATS0
AT*ZS0=2
OK
Teldat S.A.
REGESTA 1