Preset Multiple Registers (Writing Of Data To Multiple Holding Registers) (H10 Or 16) - Mitsubishi Electric 800 Series Instruction Manual

• Query message setting
Message
a Slave Address
b Function
c Subfunction
d Data
• Content of normal response
With a normal response, the content is the same as a to d (including the CRC check) query messages.
NOTE
• With broadcast communication, no response is generated even if a query is executed, so when the next query is
made, it must be made after waiting for the inverter data processing time after the previous query is executed.
4.5.9 Preset Multiple Registers (writing of data to multiple holding registers) (H10 or
16)
• Data can be written to multiple holding registers.
• Query message
a. Slave
b. Function
Address
H10
(8 bits)
(8 bits)
• Normal response (Response message)
a. Slave
b. Function
Address
H10
(8 bits)
(8 bits)
72
PARAMETER
Set the address to send messages to. Broadcast communication is not possible.
(Invalid when "0" is set.)
Set H08.
Set H0000.
Any data 2 bytes long can be set. Setting range is H0000 to HFFFF.
c. Starting d. No. of
Address Registers
H L H
(8 bits) (8 bits) (8 bits)
c. Starting Address
H L H
(8 bits) (8 bits) (8 bits)
Description
e.
ByteCount
L H
(8 bits)
(8 bits) (8 bits)
d. No. of Registers
L L
(8 bits) (8 bits)
f. Data
L ... L
(n  2  8 bits)
(8 bits) (8 bits)
CRC Check
H
(8 bits)
CRC Check
H
(8 bits)