Jog Operation (Pr. 15, Pr. 16) - Mitsubishi Electric FR-E540-0.4K-EC Instruction Manual

z z

Jog operation (Pr. 15, Pr. 16)

4.2.10 Jog operation (Pr. 15, Pr. 16)
Pr. 15 "jog frequency"
Pr. 16 "jog acceleration/deceleration
time"
Jog operation can be started and stopped by selecting the jog mode from the control
panel and pressing and releasing the
y Set the frequency and acceleration/deceleration time for jog operation.
Parameter Factory
Number Setting
15
16
Output frequency (Hz)
Jog frequency
Pr.15
setting range
Note: 1. In S-shaped acceleration/deceleration pattern A, the acceleration/
deceleration time is the period of time required to reach Pr. 3 "base
frequency", not Pr. 20.
2. The acceleration time and deceleration time cannot be set separately for jog
operation.
3. The value set in Pr. 15 "jog frequency" should be equal to or greater than the
Pr. 13 "starting frequency" setting.
Pr. 18 ÎRefer to Pr. 1, Pr. 2.
Pr. 19 ÎRefer to Pr. 3.
Pr. 20, Pr. 21 ÎRefer to Pr. 7, Pr. 8.
RUN
Setting Range
5Hz 0 to 400Hz
0 to 3600 s
0.5 s
0 to 360 s
Pr.20
Forward
rotation
Pr.16
ON
key
FWD
key
REV
Related parameters
Pr. 20 "acceleration/deceleration
reference frequency"
Pr. 21 "acceleration/deceleration
time increments"
key ( , key).
FWD REV
Remarks
When
Pr. 21 = 0
When
Pr. 21 = 1
Reverse
Time
rotation
ON
80
PARAMETERS
4